-
The Scanmatik SM3 Pass-Thru adapter is the successor to the SM2Pro adapter with CAN-FD and DoIP protocols. It offers the widest support for the standard SAE J2534-1/2 and TMC RP1210 functions required by OEM vehicle diagnostics and reprogramming software, vehicle tuning and ECU reprogramming software such as PCMflash, BitBox, Combiloader, MDFlasher etc. Exclusive software features have been implemented to extend the range of vehicle and functions (ignition status emulation (VAG ODIS), KLINE multiplexing (MB-DAS), etc.). J1850 VPW/PWM, Chrysler SCI interfaces have been implemented to support older vehicles. -
MAGIC DISSOLVER is a distillate of natural and vegetable substances strong enough to open engine control units without damaging them and gentle enough to be used in electronic devices that were previously sealed with sealants, gels or silicones. -
Thanks to us, you do not have to send the driver to England or the USA directly to HPtuners. After we finish the driver, it is possible to cooperate with MPVI. -
MQB mileage emulator generator – device allows you to increase the mileage, it is possible to make a device for any other odometer -
AutoTuner Silicone case
The AutoTuner silicone protection case is a must for any cautious tuner. -
Hexprog II is the cutting-edge, latest-generation chip tuning tool. With Hexprog II, you gain the power to repair, clone, and chip tune Ecus/Tcus across diverse vehicles. The Full Set provides a comprehensive MASTER LICENSE with full access to all Hexprog II capabilities, including OBD, Boot, and Bench methods. This versatile solution covers cars, trucks, bikes, and boats, having ability to access Ecus/Tcus On bench, Boot mode, JTAG, and OBD maximizing your vehicle's performance potential. The price of an annual subscription is 350 usd net. -
Start diagnosing your car with OBDeleven’s NextGen Ultimate Pack! -
RaceBox Mini-25Hz-acceleration measurement, is the smaller brother of the well-known Racebox. The Mini version is equipped, as much as 25Hz GPS module, that means that the module registers its position 25 times per second - such a high frequency provides very accurate measurements. It is certainly one of the most advanced and precise Lap timers on the market. -
Brak na magazynie
The FLX2.30 cable allows connection to the control units of the ZF_8HP Type 3 automatic transmissions. Main characteristics: - Bench mode - higher communication speed - secure connection - minimal risk of error -
SMART OBD CAN FD ADAPTER supported CAN FD protocol. Diagnostic and crash data repair by CAN FD on table. Simple connection and very easy for use. -
Connection Cable: FLEX Power Cable FLX2.45 -
X-Tool Full 2025 When you buy X-Tool, you will receive updates valid until the end of 2025. Next year, you will still be able to use the tool, but new updates will be charged extra. -
Brak na magazynie
Autoxscan SD960PRO is an indispensable device in a car workshop and in a garage. The device has its own air pump, without relying on other machines.
Trolley MS with power strip
The DC/DC Converter is a device suitable for control unit programming with Flex. Voltage values can be adjusted during chiptuning operations. Main features:- Easily adjustable voltage
- Compatible with Flex programmer
- Compatible with electronic units in Bench mode
- Display LCD
The KA3010P laboratory power supply is a stabilised power supply with programmable memory and stepless voltage regulation from 0 to 30V and stepless current regulation from 0-10A.
X-Tool Full 2025 + RH850 adapter and Can FD. When you buy X-Tool, you will receive updates valid until the end of 2025. Next year, you will still be able to use the tool, but new updates will be charged extra.
The GYSFLASH 121.12 CNT FV is a high-power charger with an output current of 120 A using pulse technology. CONNECTED. The device allows the voltage of a 12 V lead or lithium battery to be maintained at a perfectly stabilised level during diagnostic operations. It provides the best charge cycle recommended for the maintenance of the most advanced vehicles on the market. The USB connection makes the unit 100% configurable.
Smoke generator liquid with spout-shaped applicator liquid for smoke generators
Brak na magazynie
LED workshop lamp.
LED: Super bright SMD and COB LEDs, 6500 K, CRI 80 + / Light output.
Cable New Trasdata EDC7UC31 Bench
EDC7UC31 for use with the New Trasdata tool. Used for easily connecting to ECUs without the risk of bending pins, and also saves a lot of time and Time is money.
New Trasdata Full - kir from DIMSPORT to work via OBD + Bench&Boot Kit includes:- NEW TRASDATA Hardware
- Full protocols Master Activation
- Bench
- Boot
- BDM
- JTAG
AUDI A5 mileage emulator generator device allows you to increase the mileage, it is possible to make a device for any other odometerBrak na magazynie
Specifically designed to be fitted on a wall or on a car lift, the vertical GYSFLASH 102.12 is a very powerful inverter battery charger able to supply up to 100A. The GYSFLASH 102.12 will keep the battery’s voltage perfectly stable at 12V during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market.
Professional automatic leak tester for pipes, hoses, joints and installations AutoXScan SD930PRO detects leaks using a smoke generator. The device will help you locate leaks in piping systems quickly and accurately within minutes. The equipment comes from the authorized Polish distribution of AutoXScan.
Igla 231 to can immobilizer is an innovative device that protects a vehicle from theft by locking the engine or transmission. It does not require additional wiring, CAN bus wires are used for installation. Deactivation of the security feature is possible using the - mobile application on the phone (possibility of pairing two phones) - PIN code which the user sets on the car's factory buttons. - key fobs (2 pcs.) included in the set with dimensions of 4 x 2.5 x 0.3 cm Installation of the system does not affect the vehicle's warranty, the device is compatible with internal combustion, electric and hybrid cars. The device is difficult to detect due to its small size (5 x 1.3 x 0.4 cm). Provides protection against theft methods: - per “Suitcase” - via OBD port - on a GameBoy - on a “Nokia 3310” - jamming the autopilot Included in the price of the device is the installation service performed in our workshop at 05-090 Wypędy, 24 Majowa Street. Before purchasing, please contact us to arrange a visit tel. 577 446 404
DynoDrive is an advanced feature, available exclusively with Alientech Suite and KESS3, that allows you to calculate and verify performance while driving your vehicle. It is a one-time activation and there are no additional annual fees. Activations can even take place on an account with an already expired subscription. Configure KESS3 Master or Slave by adding DynoDrive activation, or get KESS3 hardware only with DynoDrive activation, thus configuring the tool even just to handle power tests.Brak na magazynie
The rotator is used to rotate the crankshaft of the flywheel on Mercedes and MAN trucks. It facilitates accurate positioning of the crankshaft when setting the timing gear. TECHNICAL DATA Dimensions 82.5x98x83 mm Drive 1/2‘’ Outside diameter 33 mm Weight 792 gBrak na magazynie
New Genius Master Car/ LC- NEW GENIUS Hardware
- HASP Key
- Protocols activation : Car/LCV
Volkswagen Polo VI mileage emulator generator - device allows you to increase the mileage, it is possible to make a device for any other odometer
Start diagnosing your car with OBDeleven’s NextGen device!
INSPECTION CAMERA 210° TILT IP67 LCD X305PRO ENDOSCOPE 1080 HD
Applicable for automatic control, mechanical maintenance. Automotive, construction, power plants, chemical pipelines, safety monitoring, etc. The handy part of the device is silicone lined for a comfortable grip and lightweight design, making it easy to operate with one hand.
Autocom Charger (GYSFLASH) 6-24V 100A W071068001
Autocom CHARGER 6-24V are high-power chargers with inverter technology. They maintain a stable voltage throughout the vehicle’s electrical systems. The voltage can be adjusted in order to meet the requirements of different vehicle manufacturers. CHARGER 6-24V Robust unit with a wide range of use for the entire vehicle fleet. • Supports up to 100A. • For 6, 12 or 24V lead or lithium batteries from 5 - 1200 Ah. • Cable reel on the front. • To be placed on a wall, a trolley or a vehicle lift
Autocom Charger (GYSFLASH) 12V 120A W071068002
CHARGER 12V Powerful and smooth unit for passenger cars and LCV. • Supports up to 120A. • For 12V lead or lithium batteries between 5 - 1500 Ah. • Low height (13 cm) allows the device to fit underneath a vehicle.
The ABRITES VIN Reader is a standalone device which allows you to read the vehicle’s identification number with the click of a button. This Bluetooth-enabled interface is compatible with nearly all vehicle brands on the market. It allows you to connect to the vehicle and read the VIN numbers in it via the OBDII port. Within 30 seconds the VIN Reader shows the identification numbers, then cross-checks it against a couple of databases for stolen vehicles, which ensures safety and security, both for professionals and for end users.Go to Top