Flex MASTER – FULL SW Package + ToolCase FLX8.31

31,000.00
25,203.25 netto(without VAT)

In stock

The subject of sale is the FLEX device with all available protocols in Master mode. The successor of the X17 device allows reading the contents of the controller’s memory both through the OBD connector, in the Bench and Boot modes. The basic function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred.

In stock

Description

Flex MASTER – FULL SW Package + ToolCase FLX8.31

Wymiana HW MAGPro2X17

The purchased device in the Flex FULL Package MASTER mode allows you to open the read memory areas, and thus independent modification.

FLEX, a new solution by Magicmotorsport, has been released to replace the famous MAGPro x17. It is a modular solution which allows you to choose only the protocols you need.

For advanced and repairing jobs, use the Flexbox module to program your control unit in BDM, Bootloader, JTAG and AUD modes. The device detects eventual connection or communication errors thanks to the concept of its state-of-the -art design.

FLEX allows you to easily tune, reprogram, upgrade or modify the software of most control units directly through the OBD socket of the vehicle. An internet connection gives you access to all the potential that the tool offers you.

The device allows you to read / write memory not only in passenger cars, but also in trucks,tractors, motorcycles and boats. A full list of supported engines can be found at (currently 10342 vehicle models): https://www.magicmotorsport.com/flex/vehicle-and-services-list/full-vehicle-list-for-flex/

Now you can also compose a FLEX set that will meet your expectations. Depending on your needs, you can freely configure the content or buy a full set at an attractive price – the choice is yours.

Reading methods:

  • Virtual reading via OBD connector (Internet connection required) is possible in vehicles using diagnostic protocols:
    •  ISO 15765: 2 x CAN
    • ISO 99141-2 & ISO 14230: 2 x K-LINE, 1xL-LINE
    • Ethernet
    • SAE J1850 PWM, VPW
    • SAE J1708
  • In BOOT mode, the device provides support for:
    • BDM MPC5xx
    • Bootloader C167
    • Bootloader ST10F2xx
    • Bootloader TC17xx
    • Nexus MPC / SPC 5xxx bootloader
    • JTAG Renesas SH705x
    • JTAG Renesas SH72xxx
    • AUD NEC 76F00xxv

FLEX stands out  by its intuitive operation. Just select the vehicle / driver from the list, and then display the instruction that illustrates the connection of the driver to the device depending on the selected reading method.

In addition, you can buy special tokens that can be exchanged for services. The following is a detailed list:

Additional functions for green coins (- you get 30 every month, do not accumulate):

  • DPF OFF
  • DPF + EGR OFF
  • IMMO OFF
  • HOT START
  • EGR OFF
  • IMMO MEDC17
  • CLONE VAG MEDC17
  • CLONE VAG PCR2.1
  • SGO DECRYPTOR
  • VAG FLSH COUNTER RESET
  • FRF/ODX Decryptor

Additional functions for red coins (- you buy in a helpdesk, the price depends on the number of tokens you buy, can be exchanged for green coins):

  • CVN FIX
  • DTC OFF
  • VAG SWIRL FLAPS OFF
  • MOD
  • ECU HARDWARE CLONE
  • ADBLUE OFF
  • SPEED LIMITER
  • “ Heavy duty vehicles “ MOD file
  • “ Heavy duty vehicles “ SCR OFF
  • “ Heavy duty vehicles “ DPF OFF
  • “ Heavy duty vehicles “ EGR OFF
  • “ Heavy duty vehicles “ CAT OFF
  • “ Heavy duty vehicles “ SWIRL VALVE OFF
  • “ Heavy duty vehicles “ LAMBDA OFF

Base device includes:

  • Cabling kit: FLX3.5 color coded wiring harness
  • Adapter kit: 6 pcs set of pin adapters to FLX4.2
  • FLEX Base Module
  • FlexBox Module for FLEX
  • Connection cable OBD: FLEX to CAN/Kline RED
  • Connection cable OBD: FLEX to ENet GREEN
  • Connection cable: USB 2.0 AM-BM BLK 1.8m
  • Power Supply adapter 110-240V 14V 5A
  • Connection cable: FlexBox port C to NEC 7F00 XX
  • Connection cable: FlexBox port D to BDM MPC5xx
  • FlexBox port E 40 pins adapter for FLX3.5
  • Flex & FlexBox diagnostic adapter

Examples of reading the contents of the EDC16 and EDC 17 controllers memory in Bench mode with Flex FULL Package MASTER:

 

The device is also available in Flex FULL Package Slave version:

Flex – FULL SW Package – SLAVE

FLEX + DynoRoad – road dyno set with FLEX HW

Additional information

FLEX

Podstawa

Software Packages available

FLS0.10M – Software Flex BOOT Tricore – MASTER, FLS0.1M – Software Flex ECU OBD + Bench – MASTER

Title

Go to Top