-
Sale!
Autotuner is a universal tool able to read information from most ECUs and microcontrollers available on the market in boot tricore Infineon (BSL), in bench or via the OBD diagnostic socket. -
PicoScope WPS500X is an advanced pressure sensor designed for precise measurements across a wide range of automotive applications. It is ideal for professionals who require accurate and repeatable diagnostic results.Features and Benefits:
- Versatility: Measures absolute pressure, gauge pressure, and vacuum in various systems.
- Accuracy: Precise readings ranging from -15 psi to 500 psi.
- Fast Response: Instant reaction to pressure changes thanks to advanced sensor technology.
- Ease of Use: Compatibility with PicoScope oscilloscopes allows for easy integration and data analysis.
-
Sale!
The subject of the sale is the FLEX Full Master FLK02.V02 device including additional connectors and cable with all available protocols in Master mode. The successor of the X17 device, it allows the reading of the contents of the drivers' memory both via the OBD connector, in Bench and Boot mode. The primary function of the device is to read and write flash and eeprom memory, as well as full cloning of engine and gearbox controllers. Ultimately, all protocols currently supported by the X17 module will be ported. The kit includes the following connectors: FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142 FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3 FLX4.2I: connectors for MDG1 FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150E The kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle's standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more. -
Sale!
New Genius + New Trasdata Master JOINT ACTIVATION - FULL - kit from DIMSPORT Kit includes:- NEW GENIUS Hardware
- HASP Key
- Protocols NG: Full protocols
- NEW TRASDATA Hardware
- Protocols NT: Full protocols
-
DFB Technology offers solutions for reading and writing engine and automatic transmission control units for cars, trucks, motorbikes, agricultural and construction machinery. The DFOX tool is an essential tool for engine enthusiasts and specialist mechatronics technicians who want to use a complete and versatile tool. MASTER tool, reads/writes open BIN files. Price includes one year of subscription For other configurations, please contact us. -
DynoPro is a road test bench for measuring power, torque, acceleration and other parameters of passenger cars and other combustion or electric vehicles. Measurements can be made on vehicles with any type of drive. No power limit for the measured vehicle. The dynamometer is intended for use in widespread motorsport by professionals. -
OLS505 is a full version of the software which allows you to sell files, mass export or create scripts and customer databases. WinOLS is the most professional software created to modify the content of ECU memory. WinOLS makes it easy to search for maps, which you can then name and browse in various ways and change. -
This set includes Jaltest hardware + software for agriculture, heavy machinery, material handling Euipment. Jaltest is a Multibrand and Multisystem diagnostics tool developed to perform the most advanced construction machinery, equipment diagnostics and maintenance tasks in an easy and intuitive way The first annual subscription is included in the product price. Each subsequent renewal is equal to: Jaltest MHE: First: 115€, Each: 375€ Jaltest OHW: 675€ Jaltest AGV: 545€ -
Sale!
HEX-V2 + VCDS Pro licence allows diagnostics of cars from VAG group (VW, AUDI, SEAT, SKODA) produced in years 1990-2024. Price includes one year SFD subscription -
PCM flash is an integrated software solution intended for reprogramming ECUs and TCUs of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus and other vehicles It is possible to purchase the protocol itself for an already existing USB dongle. When purchasing, please provide the e-mail address that was assigned to it and the Dongle number that can be copied from the PCM Flash software. -
A device plugged into the OBD socket, which will inform you about the beginning and end of the regeneration procedure of the particle filter in your car from the VAG group. The device allows you to reduce fuel consumption and extend the life of the DPF due to its proper operation. In addition, the proper operation of the DPF filter protects the engine as well as the turbocharger.
Device in a set with LED diode.
Please enter the engine code when purchasing, this information will allow us to continuously develop the device
If you do not know the engine code and the car is manufactured after 2010, please enter "????" in the space for the engine code and enter the VIN in the comments. If you have questions about the operation of the device, please read the detailed manual of the device available here If you have purchased the device and have any doubts as to its operation or handling, please contact us in the first instance by email or telephone. Contact details for the department that looks after this product can be found in the contact section. -
Sale!
Autotuner is a universal tool able to read information from most ECUs and microcontrollers available on the market in boot tricore Infineon (BSL), in bench or via the OBD diagnostic socket.
-
Full version of the software. Chiptuning software with full file calibration map database. Does not include the checksum package. Includes 12 months subscription. Product number: 149757ECM9 -
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods - OBD/ Bench&Boot If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95% New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net. -
Sale!
The object of sale is a FLEX FLK02.V02 device containing additional connectors and cable with all available protocols in Slave mode. Successor of the X17 device, it allows reading the contents of the drivers' memory both through the OBD connector, in Bench and Boot mode. The primary function of the device is reading and writing flash and eeprom memory, as well as full cloning of engine and transmission controllers. Ultimately, all protocols currently supported by the X17 module will be transferred. The kit includes the following connectors: FLX4.2G: connectors for EMS3140, EMS3141, EMS3160, EMS3161, EMS3142 FLX4.2H: connectors for EDC17C49, EDC17C69, EDC7UC32, EDC7C1, EDC7C2, EDC7C3 FLX4.2I: connectors for MDG1 FLX4.2L: connectors for earthmoving machinery, trucks, agricultural machinery and construction vehicles, including Cummins CM2150C, Cummins CM2150E The kit also includes the FLX2.14 cable: manufactured by Magicmotorsport, it allows the Flexbox to connect directly to the vehicle's standard OBD port. This 44-pin connector accessory allows you to use the Flexbox touch button to select one of four available modes during bench programming and more. Przydatne informacje o dostępnych wersjach urządzenia MagicMotorSport Flex oraz metodach odczytu sterowników dostępne TUTAJ -
Sale!
New Genius + New Trasdata Master JOINT ACTIVATION - CAR & LCV + BIKE & ATV - kit from DIMSPORT Kit includes:
- NEW GENIUS Hardware
- HASP Key
- Protocols NG: CAR & LCV + BIKE & ATV
- NEW TRASDATA Hardware
- Protocols NT: CAR & LCV + BIKE & ATV
-
Sale!
New Genius + New Trasdata Master JOINT ACTIVATION - TRACTOR & AGRIC. VEHICLE - kit from DIMSPORT Kit includes:
- NEW GENIUS Hardware
- HASP Key
- Protocols NG: TRACTOR & AGRIC.
- NEW TRASDATA Hardware
- Protocols NT: TRACTOR & AGRIC.
-
A device plugged into the OBD socket, which will inform you about the beginning and end of the regeneration procedure of the particle filter in your car from the VAG group. The device allows you to reduce fuel consumption and extend the life of the DPF due to its proper operation. In addition, the proper operation of the DPF filter protects the engine as well as the turbocharger.
Please enter the engine code when purchasing, this information will allow us to continuously develop the device
We offer devices with led diode available HERE If you do not know the engine code and the car is manufactured after 2010, please enter "????" in the space for the engine code and enter the VIN in the comments. If you have questions about the operation of the device, please read the detailed manual of the device available here If you have purchased the device and have any doubts as to its operation or handling, please contact us in the first instance by email or telephone. Contact details for the department that looks after this product can be found in the contact section. -
Dioed for DPF control -
Sale!Brak na magazynie
New Genius + New Trasdata Slave JOINT ACTIVATION - FULL - kit from DIMSPORT Kit includes:
- NEW GENIUS Hardware
- HASP Key
- Protocols NG: Full protocols
- NEW TRASDATA Hardware
- Protocols NT: Full protocols
-
A new product from Alientech- One device with a choice of protocols tailored to specific vehicle groups and reading methods - OBD/ Bench&Boot If you have a previous KESSv2 or K-TAG device please contact us. For existing Alientech users, there is an exchange program that allows you to receive a discount of up to 95% New device -> lower annual subscriptions. From now on, the cost of annual subscription for Master version is 1190 EUR net regardless of the number of protocols. For Slave version it is 590 EUR net.
-
Cable FLEX Bench BMW ZF8HP TCU
Bench cable for ZF8HP, for reading/writing Auto gearbox TCU/flash.Allows easy connections between a tool and BMW ZF8HP TCUs.
The ABRITES VIN Reader is a standalone device which allows you to read the vehicle’s identification number with the click of a button. This Bluetooth-enabled interface is compatible with nearly all vehicle brands on the market. It allows you to connect to the vehicle and read the VIN numbers in it via the OBDII port. Within 30 seconds the VIN Reader shows the identification numbers, then cross-checks it against a couple of databases for stolen vehicles, which ensures safety and security, both for professionals and for end users.
Adapter BCM 2-Keytool PLUS / MINI PROG / VVDI PROG
BCM 2 adapter that allows you to read data from protected BCM 2 modules found in Audi.Included are:
- xdnp63 needle adapter
- xdnp64 needle adapter
- 4 x locking plates
- Cable for Keytool PLUS / MINI PROG
- Cable for VVDI PROG
- Cable for soldering
- 6 x mounting screws
- Audi 2013-2019 A4, A5, Q5 (list of supported SW versions can be found directly in VVDI PROG/MINI/PLUS)
- Audi 2013-2019 A6, A7, A8 (list of supported SW versions can be found directly in VVDI PROG/MINI/PLUS)
The adapter is used to read RENESAS (M32, M32R, M32Rx) F34NTA13 engine controllers. It allows the NEW TRASDATA device to be connected to the ECU.
TEMIC bench controller connection adapter is a replacement for Alientech: 144300K251, Dimsport: F32GN053 cable To connect requires OBD2 cable for Kess: 144300K249 or New Genius: F32GN051Brak na magazynie
All FCA vehicles after 2018 are equipped with a SGW security gateway module to prevent attacks on the vehicle's network via the CAN bus. Direct connection to the OBD II-16 connector does not always give the required results-you can read errors but not clear them, you cannot program the controllers as well as make adaptations/adjustments, etc. In the case of this problem, you can bypass the SGW (Security Gateway) using the presented adapter so that full communication functionality is available.Brak na magazynie
OBDSTAR adapter designated P003 designed to work with drivers using devices such as:- X300 DP PAD
- X300 DP PLUS
- X300 series
- KM DP PLUS
Articulating Arm Adapter FLEX for MAGK00030.V2 FLX4.10.1
The adapter will allow you to attach the articulated arm to any BMD frame. When combined with the articulated arm from the link below, it enables connecting BDM adapters to the FLEX device without the need to purchase the entire frame.
Universal adapter from Renault/Volvo Truck OBD2 to 8 pin
Adapter Renault/Volvo Truck with OBD2 on 8 pin to cable OBD2 Kess/New Genius TRW/Lukas and other diagnostic devices +12V, GND, J1708-, J1708+
Universal adapter with OBD2 on 8 pin for Renault and Volvo trucks
Brak na magazynie
Adapters Bench FLEX (for connecting ECU/TCU with FLK35) FLK42A
Connectors size A, which are included in the basic FLEX device.
The FLK42A adapters allow the FLK35 coloured kit cables to be connected to the ECU and TCU modules.
Brak na magazynie
Adapters Bench FLEX (for connecting ECU/TCU with FLK35) FLK42B
Connectors size B, which are included in the basic FLEX device.
The FLK42B adapters allow the FLK35 coloured kit cables to be connected to the ECU and TCU modules.
Brak na magazynie
Adapters Bench FLEX (for connecting ECU/TCU with FLK35) FLK42C
Connectors size C, which are included in the basic FLEX device.
The FLK42C adapters allow the FLK35 coloured kit cables to be connected to the ECU and TCU modules.
Brak na magazynie
Adapters Bench FLEX (for connecting ECU/TCU with FLK35) FLK42D
Connectors size D, which are included in the basic FLEX device.
The FLK42D adapters allow the FLK35 coloured kit cables to be connected to the ECU and TCU modules.
Brak na magazynie
Adapters Bench FLEX (for connecting ECU/TCU with FLK35) FLK42E
Connectors size E, which are included in the basic FLEX device.
The FLK42E adapters allow the FLK35 coloured kit cables to be connected to the ECU and TCU modules.
