-
The RR029 allows mileage calibration on ATE ABS modules, on vehicles manufactured after 2020, including Megane IV ph2 and Talisman ph2 models. It is the ideal tool, solving the problem when the ABS module is replaced and the correct mileage value needs to be set. -
VN023 is another special function designed to work with the ABRITES RH850/V850 Programmer - allowing the Visteon and JCI clocks, equipped with RH850 processors, to change the waveform. -
The VN022 special function has been developed for use with the ABRITES RH850/V850 programmer to record mileage data on a non-Immo V dashboard. The new solution was developed for 8th generation VW Golf vehicles. At the same time, it makes it possible to calibrate the meter in Volkswagen, Audi, Seat, Skoda and other VAG vehicles based on the same platform. Capabilities: Recording of mileage data by the RH850 processor in Continental/VDO dashboards; Vehicles supported: VW Golf 8 and other VAG vehicles of the same generation (where the immobiliser is not integrated into the dashboard) You will need the ZN085 ABRITES RH850/V850 programmer to perform the procedure. When working with these processors, follow the wiring diagrams available in the software! AVDI, active AMS and a VN021 licence are required. -
The FN024 significantly increases the possibilities for key programming in FCA cars. With the special function FN024, we gain the possibility of preparing and programming Atmel-type keys in FCA group vehicles. -
The special function MN034 enables ALL original FBS4 Mercedes DAS (Drive Authorisation System) modules to be personalised. MN034 works closely with function MN032. Personalisation takes place via the internal CAN bus of the control modules. -
MN035 VGS4-NAG2 FBS4 virgin/personalisation via ABPROG is dedicated to working with the VGS4-NAG2 7G-Tronic TCU FBS4/DAS4. Capabilities: - reading FBS4 data from the VGS4-NAG2 module using ABPROG, - restore VGS4-NAG2 module to virgin state using ABPROG, - writing of personalised FBS4 data to the TCU using ABPROG (for holders of the MN034 special function, writing via the internal CAN-BUS is also possible). For complete information on how to use the ABRITES special features on models supported by the MN035 function, please refer to the manual HERE and HERE An ABPROG ZN030 programmer and AVDI interface, with an active AMS subscription, are required to use the MN035 function. -
ABRITES Support Plan Service Plus (SPS Plus) includes an annual subscription service (providing access to the ABRITES ticketing system) and an interface replacement service for 12 months. Abrites Support Plan Service Plus enables customers to receive support from the Abrites support team and AVDI replacement in the event of a failure. -
RR027 allows you to programme keys in ALL KEYS LOST situations and add spare keys to Dacia vehicles manufactured after 2020 equipped with Marelli UCH. -
BN015 now includes key programming for BDC 85 or later versions via OBDII! This licence allows you to perform key programming procedures (adding a spare key and ALL LOST KEYS) for ALL E-series vehicles with CAS3 and CAS3+ modules and F-series vehicles with BDC modules COMPLETELY THROUGH OBDII. -
The FR011 enables key programming for the brand's latest 2021+ models equipped with RH850* processors. These vehicles include the F150, Maverick and many more. -
HK012 allows you to calibrate the vehicle identification number of new or used modules on Hyundai and KIA vehicles. Using this function, you can set the identification number of new or used ECM/VCU modules and dashboards that is required to match them to the vehicle. -
The SB002 licence enables key reading for Subaru 2021+ (keyless) vehicles via OBDII. This special feature enables keyless operation of BRZ 2022+ and 2020+ models with DST AES keys. -
The TN016 licence provides complete key programming software for the full range of Lexus vehicles manufactured after 2018. Even the latest 2022/2023 RX and NX models with B9 DST-AES and Denso Smart System keys are supported. -
NN010 licence for use with the ABRITES RH850/V850 programmer. This functionality enables the extraction of a PIN code by dump from HFM (keyless models) and BCM (keyless models) modules with locked RH850 processors for subsequent key programming in situations where all keys are lost for a range of Nissan vehicles. Main functions:- PIN code extraction by dump
- All Keys Lost key programming
-
The VN021 licence allows immobiliser data to be extracted from the RH850 processor dump used in VAG MQB dashboards with Megamos-AES keys. After reading the RH850 processor with the ABRITES programmer, the CS, MAC, Keys and PowerClass information is visualised in the software. -
The TN014 feature extends the capabilities associated with operating the latest generation of Toyota vehicles equipped with the Tokai Rika Smart system with BA-type HT-AES keys. -
The TN015 special feature extends the capabilities associated with servicing the latest generation of Toyota vehicles, manufactured after 2020, equipped with the Denso Smart System with BA-type DST-AES keys. -
RR026 has been developed to facilitate the operation of the ABRITES RH850/V850 programmer. This licence allows the PIN to be extracted by dropping from HFM (keyless models) and BCM (keyless models) modules for subsequent key programming in situations where all keys have been lost for a range of Renault vehicles. -
FN023 allows the adaptation of non-immobiliser modules in Alfa Romeo, Fiat, Jeep and Lancia vehicles. -
MN033 is designed for solving the problem with ‘a’ component ELV , which prevents the vehicle from starting and driving. This is a common fault in electronic steering lock modules (ESL/ELV). MN033 makes it possible to clear the critical fault blocking the vehicle's electronic steering lock. The function is performed with a direct connection to the ELV diagnostic line . This can be performed directly on the vehicle or on a workbench. Supports all FBS4 vehicles with ESL/ELV modules.An AVDI interface with an active AMS module is required to use this special function. The use of connection cable CB026 - FBS4/FBS3 ELV is recommended. -
The MN032 enables the replacement of Mercedes-Benz vehicle modules, key programming and remote controls for both new and used control units for all vehicles up to and including the FBS3 generation. -
The package includes all special ABRITES features dedicated to Porsche vehicles: PO006, PO008, PO009. -
This package includes all ABRITES special features for GM vehicles: ON013 and ON14. -
This package includes all ABRITES special features for FCA vehicles: FN015, FN021, FN022, FN023 and FN024. -
PN009 is a licence for Peugeot and Citroën vehicles which enables:- Read/update configuration data (EDC15, EDC17(BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;)
- Flash memory read/update
- IMMO deactivation (EDC15)
- Modify/reset service intervals (EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;)
- Reading/updating the PIN codes of the engine control units (EDC15, SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;)
- Dashboard mileage reading and calibration EDC16, EDC17(BOOT MODE), SID201, SID801, SID801A, SID802, SID803, SID803A, SID804, SID806;
-
This package contains special functions TN009, TN014, TN015 and TN016 -
This is a package containing all ABRITES special features for Ford vehicles: FR010 and FR011. -
The EP005 licence allows procedures to be performed on engine controllers and AdBlue modules in trucks, motorbikes, boats and industrial vehicles (heavy vehicles, tractors, agricultural machinery) via diagnostics (OBDII).For full details on how to use the special functions of the ABRITES EP005, please refer to the manual HEREAn AVDI interface and an active AMS are required to use the EP005. -
The Mercedes-Benz MN00C package includes licences such as MN030, MN032, MN033, MN034 and MN035. Feature MN033 is designed to address the ‘ELV Component Fault’, which prevents the vehicle from starting. This is a common fault in electronic steering lock (ESL/ELV) modules. MN033 allows you to clear the fault that is blocking the vehicle's electronic steering lock. -
The MN031 licence was developed by the Abrites team for vehicle immobiliser procedures. This functionality enables various procedures to be performed on Mercedes-Benz trucks. These include: -
The latest Abrites solution for Renault and Dacia vehicles is now here! With RR024, you can adapt and renew the BCM and HFM modules on many models in the group, as well as delete crash data from the airbag. -
NN009 is a new functionality from Abrites for key programming and PIN reading via the OBDII connector, enabling the learning of spare keys and resolving situations involving the loss of all keys on Nissan/Infiniti vehicles. It is an update to NN008 and includes all its capabilities. -
The HK011 licence is a new solution for Hyundai/KIA from Abrites.It is an update of the special function HK008, which allows you to perform key programming as well as PIN code reading on almost 100% of Hyundai and KIA vehicles . -
The licence is designed for the reading of PIN codes and the programming of keys and remote control for Fiat/Lancia/Alfa/FCA (FIAT CHRYSLER AUTOMOBILES) vehicles for mechanical keys and keyless access keys. -
This functionality allows component security (CS) bytes to be read from locked BCM2 2013-2018 modules for both A4/A5/Q5 and A6/A7/A8/Touareg platforms. These CS bytes are then used for key programming. -
MN030 is the latest feature dedicated to odometer calibration and module replacement via OBDII on FBS4 vehicles equipped with the IC213 or IC222 dashboard
