-
MAGIC DISSOLVER is a distillate of natural and vegetable substances strong enough to open engine control units without damaging them and gentle enough to be used in electronic devices that were previously sealed with sealants, gels or silicones. -
Measurement takes place by driving the vehicle with the given wheel through the scales - the total weight is displayed when the "Total" button is pressed. Using two scales speeds up the measurement significantly -
An aluminum wireless scale with an ultra-thin design of overrun plates allows for weighing the vehicle, e.g. before performing a measurement on a road dynamometer by running on the plates -
Brak na magazynie
The Gysflash 100-12 H/F is an Inventer technology stabilised power supply with 5 functions: - Charging batteries using a device with an advanced load curve - Supporting 12V batteries, gel or liquid, during diagnostic work - Supports batteries in show cars during showroom - In "battery change" mode, the unit maintains the vehicle's electrical power supply to preserve settings and memory data. - Stabilised high-power supply with adjustable maximum voltage and current. Included 5m cables! -
Zestaw zawiera:- hamownię drogową DynoPRO
- wagę bezprzewodową najazdową PROFORM do 3200 kg
-
Easy Connect set. The adapter cable and suitcase are not included in the set. It consists of 2 boxes: Easy Connect + Repeater for connecting electronic car modules on the table (ECU / Radio / Key switch or counter) -
Wire - Easy Connect -
Adapter - Easy Connect For connecting ecu via any cables. Additional equipment for easy conecta cables. An indispensable addition to comfortable work. -
Autoxscan SD960PRO is an indispensable device in a car workshop and in a garage. The device has its own air pump, without relying on other machines. -
Brak na magazynie
GYS GYSFLASH 101.12 CNT - 12V 100A 026988 101-12 CNT 5m cable is an Inventer technology stabilised power supply with 5 functions: - Charging batteries using a device with an advanced load curve - Supporting 12V batteries, gel or liquid, during diagnostic work - Supports batteries in show cars during showroom - In "battery change" mode, the unit maintains the vehicle's electrical power supply to preserve settings and memory data. - Stabilised high-power supply with adjustable maximum voltage and current. -
Set for easy reading of the controllers on the table, consisting of:
- BDM frame
- 4 pcs ECU opener
- 6 pcs Bootmode noodles
-
Brak na magazynie
The KA3010P laboratory power supply is a stabilised power supply with programmable memory and stepless voltage regulation from 0 to 30V and stepless current regulation from 0-10A. -
LED workshop lamp.
LED: Super bright SMD and COB LEDs, 6500 K, CRI 80 + / Light output.
-
Brak na magazynie
Specifically designed to be fitted on a wall or on a car lift, the vertical GYSFLASH 102.12 is a very powerful inverter battery charger able to supply up to 100A. The GYSFLASH 102.12 will keep the battery’s voltage perfectly stable at 12V during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. -
AUTOOL SDT 202 Car Smoke Leak Detector — an outstandingly professional auto pipes leak Smoke Tester. It will help us position cars motorcycles leaks on the pipe systems in minutes, quickly and exactly, such as Intake System Test, Exhaust Systems Test, Car Sealing Test, Fuel Tank System Test, Various Pipe Fittings Test. -
The GYSFLASH 121.12 CNT FV is a high-power charger with an output current of 120 A using pulse technology. CONNECTED. The device allows the voltage of a 12 V lead or lithium battery to be maintained at a perfectly stabilised level during diagnostic operations. It provides the best charge cycle recommended for the maintenance of the most advanced vehicles on the market. The USB connection makes the unit 100% configurable. -
Brak na magazynie
Laboratory power supply KA3005D is a stabilized power supply with programmable memory and stepless voltage regulation from 0 to 30V and stepless current regulation from 0-5A. -
Brak na magazynie
The KA3010D laboratory power supply with 5 power profiles memory is a stabilized power supply with programmable memory and stepless voltage regulation from 0 to 30V and stepless current regulation up to 10A. -
The LC-2 is a controller that controls a wideband O2 lambda sensor to measure O2 content in exhaust gasses. -
Brak na magazynie
"The Bench Platform is a state-of-the-art tool for optimising service bench work in the vehicle electronics industry. It allows electronics to be held stably and securely during repair and programming, offering easy access to equipment. -
BENCH TESTER is a device used for testing vehicle electronics.Modern electronic systems are activated in the vehicle with digital information on the CAN or LIN bus. When the ignition is turned on, electronic components, such as the meter (DASHBOARD) or power steering electronics (EPS), receive information on the CAN bus about the ignition (15) from one of the modules like GATEWAY or BCM.
So in order to turn on the tabletop removed electronics from the vehicle we need the right digital information, without it we have no way to start the electronics in question outside the car.
BENCH TESTER is a test platform with which we have the ability to connect and start the electronics outside the car.
BENCH TESTER is an interface that has the ability to connect any electronics used in motor vehicles.
-
GODIAG GT100+ New Generation OBDII Break Out Box ECU Bench Connector with Electronic Current Display and CANBUS Protocol is the latest testing platform for OBDII protocol communication detection and ECU maintenance/ diagnosis/ programming/ coding.
-
Brak na magazynie
The probe is exclusively used for Bosch EDC17 ECUs. It is required when working in boot mode. -
The 2 – Channel Starter Kit is the cheapest kit offered by Pico. This set includes basic equipment which includes, among others, signal cables, probes and battery clamps. -
Brak na magazynie
The WPS500X is a pressure and vacuum sensor with a wide measuring range. With its uncompromising resolution and accuracy, you can make fast and precise diagnostic tests of various systems in your car -
Trolley MS with power strip -
Trolley MS with power strip -
Blank key for Mercedes truck FBS3 system Reprogrammable (could be reprogramed several times). For programming a key needs: 1. VEI V6/V7 2. DC2U tool kit 3. IRRF tool kit 4. EIS cables set 4. License SFTP KEYS 5. License EIS ISP -
The Tornado90000 is TOPDON's newest cutting-edge smart charger, made for professional and commercial users. This device is suitable for all types of 12V and 24V lead-acid batteries, with a wide battery capacity range from 5 to 90 amps. The Tornado90000 features a current/voltage edit function and supplies users with the needed protection for batteries through its 9-step smart charging method and 6 charging modes. SUPPLY Mode provides a stable DC output and can be used as a programming voltage stabilizer. -
Complete fixing kit containing 4 magnets + metal plate + supports. Strength: 50 kg/magnet Compatibility: - GYSFLASH 32.12 EN - GYSFLASH 102.12 HF - GYSFLASH 123.12 CNT - GYSFLASH 103.12 CNT - GYSFLASH 103.24 CNT - RC-HD2 -
This kit includes a modified PicoScope PS4425A with additional protection to better withstand off-road conditions. The included accessories help users to quickly connect and easily perform non-invasive measurements of the wide range of systems and components found on these vehicles.
The PQ331 kit is the ideal diagnostic tool for agricultural and construction machinery. It includes a PicoScope 4425A oscilloscope, PicoBNC+™ probes and accessories. It enables the diagnosis of a wide range of faults, offers ease of use and free software updates.
This kit includes a modified PicoScope PS4425A with additional protection to better withstand off-road conditions. The included accessories help users to quickly connect and easily perform non-invasive measurements of the wide range of systems and components found on these vehicles.
The PQ297 kit is an extension to the Pico kits with the 4425A 4-channel oscilloscope. It enables the diagnosis of electric and hybrid vehicles. Includes:- High voltage tester
- Specialised EV/Hybrid breakout test leads
- Robust carrying case
The PQ196 is a kit equipped with a 4-channel PicoScope 4425A oscilloscope and a wide range of accessories with which it provides everything you need for the precise diagnosis and repair of hybrid and electric vehicles as well as those with internal combustion engines.
The Pico PQ194 MASTER diagnostic kit is a complete diagnostic solution for automotive mechanics and technicians. It includes a fuse box flip/ probe box (ATC, JCASE, Maxi, Mini), a 6-way flip kit, CAN-BOX test box , WPS500X pressure transducer and many other accessories in a large carrying case. The Pico 4425A oscilloscope uses PicoScope Automotive software, which is continuously updated.Title
