Autoxscan SD910PRO Hose Pipe Motor Leak Tester

Description

Autoxscan SD910PRO Hose Pipe Motor Leak Tester

Autoxscan SD910PRO

Car leak detector

Autoxscan SD910PRO is a professional smoke generator that will help you to do leak test of turbochargers, intake system, exhaust systems, cooling system, car seal, fuel tank system, various pipe fittings and more.

As a result, it is very easy to locate a leak in pipe systems within a few minutes.

The product is suitable for use in passenger cars, motorcycles, off-road vehicles, and trucks.

The smoke generator is very easy to store thanks to the use of attached accessories.

The Autoxscan SD910PRO Tester comes with EVAP adapters that can help all vehicles to find leaking parts quickly.

How does the product work?

The Autool SDT106 produces smoke that enters the sealed system of automotive pipes. Such as air intake, exhaust systems, fuel, air conditioning, etc.

Where there is smoke in the pipe, there is a fluid leak. Importantly, the device will not damage the car system.

Usage method

1. Pour 10 ml of baby oil into the leak detector.
2. Open the engine cover and hang the detector in the cover.
3. Disconnect the tube to be connected to the detector.
4. Connect the detector to the DC12V battery.
5. Turn on the power switch and the detector will start working.
6. In about 30 seconds, the pipe will fill with smoke.
7. Check leak points.

Included

• Tester Autoxscan SD910PRO
• Power cable with alligator clips
• Long smoke hose
• Hook (with compression nut)
• Rubber connecting tips (8 pcs.)
• Standard cone adapter
• Valve core key
• Special EVAP connector
• Test oil filling bottle
• Hard rubber hose plug
• Original packaging

Important information

1. When using the Autoxscan SD910PRO vehicle leakage sensor for the first time , add 10 ml of oil. Be careful NOT to exceed this range.
2. Test liquid: both liquid paraffin and baby oil can be used.
3. Fresh oil can only be refilled when the smoke becomes thin and not more than 20 ml each time.
4. Before filling with fresh oil, drain any remaining oil from the detector and change it regularly.
5. Stay away from smoke-sensitive parts during the leak detection process.
6. DO NOT use the detector for 8 minutes continuously. Needs interval breaks.
7. The detector has a smart protector, if it exceeds the working limit, eg Above 75 ℃, it will automatically turn off the power. In this case, please stop work and return after the device has cooled down.
8. The round on the back of the detector has a high temperature, be careful to avoid burns.
9. If the test tube needs to be disconnected at the center, secure the other side with a rubber stopper.

Also in our offer: