-
The VN021 licence allows immobiliser data to be extracted from the RH850 processor dump used in VAG MQB dashboards with Megamos-AES keys. After reading the RH850 processor with the ABRITES programmer, the CS, MAC, Keys and PowerClass information is visualised in the software. -
The VN022 special function has been developed for use with the ABRITES RH850/V850 programmer to record mileage data on a non-Immo V dashboard. The new solution was developed for 8th generation VW Golf vehicles. At the same time, it makes it possible to calibrate the meter in Volkswagen, Audi, Seat, Skoda and other VAG vehicles based on the same platform. Capabilities: Recording of mileage data by the RH850 processor in Continental/VDO dashboards; Vehicles supported: VW Golf 8 and other VAG vehicles of the same generation (where the immobiliser is not integrated into the dashboard) You will need the ZN085 ABRITES RH850/V850 programmer to perform the procedure. When working with these processors, follow the wiring diagrams available in the software! AVDI, active AMS and a VN021 licence are required. -
VN023 is another special function designed to work with the ABRITES RH850/V850 Programmer - allowing the Visteon and JCI clocks, equipped with RH850 processors, to change the waveform. -
ABRITES Support Plan Service Plus (SPS Plus) includes an annual subscription service (providing access to the ABRITES ticketing system) and an interface replacement service for 12 months. Abrites Support Plan Service Plus enables customers to receive support from the Abrites support team and AVDI replacement in the event of a failure. -
BMW Full: BN010 + BN11 + BN12 + BN13 *Note: PROTAG is required for the programming of the keys. For full information on the use of these special functions from ABRITES, please refer to the manual HERE. An active AMS subscription or a new AVDI interface is required to purchase additional functions. -
The BN012 licence provides various functionalities for all BMW vehicles. -
The special function FN015 is designed to read and update the internal ECU configuration memory for Fiat/Lancia/Alfa/FCA (FIAT/CHRYSLER AUTOMOBILES) vehicles via OBD. -
Proxi alignment between the BCM and other modules in the vehicle. If the BCM is replaced, it allows the current configuration of the car to be obtained from the IPC. The FCA Proxi alignment tool is an excellent solution for:- Seamless exchange and customisation of modules;
- Customisation options, enabling and disabling functions: (turning Start/Stop on and off, adding and removing rain sensors, gear shift sensors, turn signals);
- Various upgrade options;
- Reading/updating and saving Proxi alignment data on file.
-
The licence is designed for the reading of PIN codes and the programming of keys and remote control for Fiat/Lancia/Alfa/FCA (FIAT CHRYSLER AUTOMOBILES) vehicles for mechanical keys and keyless access keys. -
Initialisation of all PATS-related modules on FORD vehicles manufactured after 2014. -
The special feature HK010 shows the development of our team in the field of module neutralisation.Users can now neutralise ECUs on the table.This will help in any situation when adapting a used ECU that has not or could not be neutralised before to another Hyundai/KIA vehicle. -
The HK011 licence is a new solution for Hyundai/KIA from Abrites.It is an update of the special function HK008, which allows you to perform key programming as well as PIN code reading on almost 100% of Hyundai and KIA vehicles . -
Special feature JL006 gives the user the ability to add a key to MY20 JLR vehicles such as the 2020+ Land Rover Defender, 2020+ Range Rover Evoque, 2020+ Jaguar E-Pace and all others based on the same platform. -
A set of special mileage calibration functions for VAGs including VN007, VN021, VN022, VN023. For full details on how to use this special feature from ABRITES, please refer to the manual HERE. An AVDI interface with an active AMS subscription is required to use this function. -
The Mercedes-Benz MN00C package includes licences such as MN030, MN032, MN033, MN034 and MN035. Feature MN033 is designed to address the ‘ELV Component Fault’, which prevents the vehicle from starting. This is a common fault in electronic steering lock (ESL/ELV) modules. MN033 allows you to clear the fault that is blocking the vehicle's electronic steering lock. -
MN030 is the latest feature dedicated to odometer calibration and module replacement via OBDII on FBS4 vehicles equipped with the IC213 or IC222 dashboard -
The MN031 licence was developed by the Abrites team for vehicle immobiliser procedures. This functionality enables various procedures to be performed on Mercedes-Benz trucks. These include: -
NN009 is a new functionality from Abrites for key programming and PIN reading via the OBDII connector, enabling the learning of spare keys and resolving situations involving the loss of all keys on Nissan/Infiniti vehicles. It is an update to NN008 and includes all its capabilities. -
ON013 - PIN and Key Manager is a special function for reading and extracting PIN codes, key and remote control programming for Opel/Vauxhall/Buick/Cadillac/Chevrolet/GMC vehicles. -
The ON014 advanced configuration is designed to calibrate the clocks of Opel/Vauxhall and GM (General Motors) vehicles. Main application : Cluster Calibration Airbag: Erase Crash Data - SAB6 Siemens HC11 Radio: Read Code, Reset Counter - Delco CDR500 -
PN009 is a special function dedicated to reading and updating configuration data, reading and updating the flash, disabling IMMO, resetting service intervals and changing the PIN codes of the engine control units of the various ECUs in Peugeot/Citroën vehicles. -
PN017 is a function dedicated to the calibration of the instrument cluster and BSI meter on Peugeot/Citroën. -
PN018 is at the forefront of aftermarket solutions for key and fob programming in the Peugeot/Citroën vehicle range. Abrites Diagnostics for Peugeot/Citroën is always one step ahead in terms of PIN reading and key/fob programming on these vehicles, making PN018 the absolute leader in this field. -
Special function PN019 allows the user to make changes to various coding parameters on PSA vehicle modules, including 2021 models. This allows the user to both change the current configuration parameters and to make upgrades to the vehicle and code them as if they were originally fitted to the vehicle. Note: an AVDI interface with an active AMS module is required to use this special function. No tokens are required.
