UCCB USB-CAN converter

Description

UCCB  USB-CAN converter

USB – CAN converter module based on the STM32F042C6 microcontroller and the CAN TJA1050T system. It has a built-in voltage stabilizer ESD protection. It allows you to connect the device to a computer (via USB) or a microcontroller (via UART) via the CAN bus. The converter has a USB type A connector and a screw socket. It is visible through the computer as a COM port and works with standard terminals. It enables both sending frames with the periodic repeat function and registration of communication in the CAN network. Full documentation and additional software are available on the manufacturer’s website

Connector description UCCB converter USB-CAN:

• 5V – sypply voltage
• GND – Ground
• TX – bus communication line UART
• RX – bus communication line UART

Properties UCCB converter USB-CAN

• CAN version 2.0 support
• receiving and sending of normal and extended frames
• bound rate selection (from 60kbaund up to 1Mbaud)
• loop back mode
• frames filtering (up to 28 filters)
• listen only mode
• 5V supply voltage
• device size is 27×15 mm (without USB connector)
• selectable termination resistors
• SocketCAN support
• GSUSB support (requires diffrent firmware)
• J1939 support
• Dimensions: 27 x 15 mm (without USB)

We also offer:

Tactrix Openport 2.0

Flex MASTER FULL + set BDM Frame, ECU opener and BOOTMODE noodles